TICO Contact Adhesive S - 5 litre TICO Contact Adhesive S - 5 litre TICO - Buy Online Contact Adhesive S is a cream coloured, brushable, general-purpose contact adhesive. It exhibits excellent adhesion to most surfaces and has good heat resistance. Bonds may be made over a wide range of open times because of its fast flash off and long open time. Suitable for use with other TICO products Full application details can be found on individual cans Prep Stir adhesive thoroughly before use. Ensure the surfaces to be bonded are clean, dry and free from dirt, grease and other contamination. Lightly abrade metal surfaces. Wipe clean with a suitable solvent such as methylated spirit. Apply Apply a thin, even coat of adhesive to both surfaces. Allow to become touch-dry (approx.10 - 30 minutes). On very absorbent surfaces a second coat may be required. Align carefully and bring the two surfaces together. Apply firm pressure over the whole surface, ideally using a roller or press to consolidate the bond. The adhesive forms an immediate, strong bond, but will achieve maximum strength after a few days. The newly bonded material should not be subjected to extreme temperature changes for 3 to 4 days after bonding and avoid further fabrication until the adhesive has fully cured. Coverage 3 to 4 m2/litre per litre, depending on surface. Health & Safety Read the product label before use. Further details can be obtained from the Health and Safety Data Sheet. https://anti-vibration.solutions/collections/accessories-1/products/tico-contact-adhesive-s

TICO Contact Adhesive S - 5 litre

Code: AA-001053
£157.90
10 In Stock
  • TECHNICAL ASSISTANCE

  • UK MANUFACTURED

  • UK SHIPPING

Contact Adhesive S is a cream coloured, brushable, general-purpose contact adhesive. It exhibits excellent adhesion to most surfaces and has good heat resistance. Bonds may be made over a wide range of open times because of its fast flash off and long open time.
  • Suitable for use with other TICO products
  • Full application details can be found on individual cans
Contact Adhesive S is a cream coloured, brushable, general-purpose contact adhesive. It exhibits excellent adhesion to most surfaces and has good heat resistance. Bonds may be made over a wide range of open times because of its fast flash off and long open time.
  • Suitable for use with other TICO products
  • Full application details can be found on individual cans

Stir adhesive thoroughly before use. Ensure the surfaces to be bonded are clean, dry and free from dirt, grease and other contamination. Lightly abrade metal surfaces. Wipe clean with a suitable solvent such as methylated spirit.

Apply a thin, even coat of adhesive to both surfaces. Allow to become touch-dry (approx.10 - 30 minutes). On very absorbent surfaces a second coat may be required. Align carefully and bring the two surfaces together. Apply firm pressure over the whole surface, ideally using a roller or press to consolidate the bond. The adhesive forms an immediate, strong bond, but will achieve maximum strength after a few days. The newly bonded material should not be subjected to extreme temperature changes for 3 to 4 days after bonding and avoid further fabrication until the adhesive has fully cured.

3 to 4 m2/litre per litre, depending on surface.

Read the product label before use. Further details can be obtained from the Health and Safety Data Sheet.

https://anti-vibration.solutions/collections/accessories-1/products/tico-contact-adhesive-s