Pipe Support - Grip Pipe Support - Grip TICO Anti Vibration TICO (Grip Type) Pipe Supports or Clamps have been specifically designed to minimise vibration transmission between pipework and hanger, and also preventing corrosion between dissimilar metals. Configuration enables the pipe to be gripped and supported while accommodating small axial and torsional movements of the pipe. Pipe is fully isolated from its support to prevent electrolytic corrosion Prevents clamping damage to the pipes during installation Also prevents wear due to fretting Reduction in the transmission of noise and vibration Maintenance free and long service life Easy to install More Details The TICO Industrial Pipe Support family of products consists of Pipe Grips, Clip Strips, Clamp Blocks and Bondslips. TICO Pipe Support products perform a number of varied functions, which include:1. Supporting and positively locating pipework over long spans.2. Isolating the pipe from the mounting bolts and clamps to prevent fretting and corrosion.3. Isolating dissimilar metals (e.g. between a pipe and a clamp) to prevent electrolytic corrosion.4. Cater for movements in the pipe due to e.g. thermal expansion and contraction which might otherwise result in a build-up of stress in the pipe and potential rupture.5. Maintaining pipe spacing of multiple pipe runs over long spans.The JW reference number uniquely identifies each size of bolt. The suffix on the JW number is equal to the X dimension of the Pipe Grip (Pipe OD). There are two size ranges, based on different types of thin walled pipe:JW 172 SeriesSizes based on stainless steel pipe outer diameters to BS3974 Part 1 1974 - Rubber sleeve and pad colour coded BlackJW 173 SeriesSizes based on Cu-Ni pipe outer diameters to BS2871 Part 2 - Rubber sleeve and pad colour coded Red For Stainless Steel Pipes Stainless steel pipes O/Ds of pipes are based on BS 3974 Part 1 1974 Table 10. Pipe size Part No. Size (mm) mm inch Pipe O/D 12.70 1/2" JW 152-21 21 19.00 3/4" JW 152-27 27 25.40 1" JW 152-34 34 31.75 1 1/4" JW 152-43 43 38.10 1 1/2" JW 152-49 49 50.80 2" JW 152-61 61 76.20 3" JW 152-89 89 101.60 4" JW 152-115 115 152.40 6" JW 152-168 168 203.20 8" JW 152-219 219 For Cu/Ni pipes & O/D Stainless Steel tubing  For Cu/Ni pipes (based on seamless 'Kunifer 10' sizes) O/D of pipes conform to BS 2871 Part 2 Table 3. BS MA Table 2 BS MA60. Also suitable for O/D stainless steel tubing. Pipe size Part No. Size (mm) mm inch Pipe O/D 12.70 1/2" JW 153-16 16 19.00 3/4" JW 153-25 25 25.40 1" JW 153-30 30 31.75 1 1/4" JW 153-38 38 38.10 1 1/2" JW 153-45 45 50.80 2" JW 153-57 57 63.50 2 1/2" JW 153-76 76 76.20 3" JW 153-89 89 101.60 4" JW 153-108 108 152.40 6" JW 153-159 159 203.20 8" JW 153-219 219

Pipe Support - Grip

Code: N/A

TICO (Grip Type) Pipe Supports or Clamps have been specifically designed to minimise vibration transmission between pipework and hanger, and also preventing corrosion between dissimilar metals. Configuration enables the pipe to be gripped and supported while accommodating small axial and torsional movements of the pipe.

View Pipe Support Brochure >>

  • TECHNICAL ASSISTANCE

  • UK MANUFACTURED

  • UK SHIPPING

TICO (Grip Type) Pipe Supports or Clamps have been specifically designed to minimise vibration transmission between pipework and hanger, and also preventing corrosion between dissimilar metals. Configuration enables the pipe to be gripped and supported while accommodating small axial and torsional movements of the pipe.

  • Pipe is fully isolated from its support to prevent electrolytic corrosion
  • Prevents clamping damage to the pipes during installation
  • Also prevents wear due to fretting
  • Reduction in the transmission of noise and vibration
  • Maintenance free and long service life
  • Easy to install

TICO (Grip Type) Pipe Supports or Clamps have been specifically designed to minimise vibration transmission between pipework and hanger, and also preventing corrosion between dissimilar metals. Configuration enables the pipe to be gripped and supported while accommodating small axial and torsional movements of the pipe.

  • Pipe is fully isolated from its support to prevent electrolytic corrosion
  • Prevents clamping damage to the pipes during installation
  • Also prevents wear due to fretting
  • Reduction in the transmission of noise and vibration
  • Maintenance free and long service life
  • Easy to install

The TICO Industrial Pipe Support family of products consists of Pipe Grips, Clip Strips, Clamp Blocks and Bondslips. TICO Pipe Support products perform a number of varied functions, which include:


1. Supporting and positively locating pipework over long spans.

2. Isolating the pipe from the mounting bolts and clamps to prevent fretting and corrosion.

3. Isolating dissimilar metals (e.g. between a pipe and a clamp) to prevent electrolytic corrosion.

4. Cater for movements in the pipe due to e.g. thermal expansion and contraction which might otherwise result in a build-up of stress in the pipe and potential rupture.

5. Maintaining pipe spacing of multiple pipe runs over long spans.


The JW reference number uniquely identifies each size of bolt. The suffix on the JW number is equal to the X dimension of the Pipe Grip (Pipe OD). There are two size ranges, based on different types of thin walled pipe:


JW 172 Series
Sizes based on stainless steel pipe outer diameters to BS3974 Part 1 1974 - Rubber sleeve and pad colour coded Black


JW 173 Series
Sizes based on Cu-Ni pipe outer diameters to BS2871 Part 2 - Rubber sleeve and pad colour coded Red

Stainless steel pipes O/Ds of pipes are based on BS 3974 Part 1 1974 Table 10.

Pipe size Part No. Size (mm)
mm inch Pipe O/D
12.70 1/2" JW 152-21 21
19.00 3/4" JW 152-27 27
25.40 1" JW 152-34 34
31.75 1 1/4" JW 152-43 43
38.10 1 1/2" JW 152-49 49
50.80 2" JW 152-61 61
76.20 3" JW 152-89 89
101.60 4" JW 152-115 115
152.40 6" JW 152-168 168
203.20 8" JW 152-219 219

For Cu/Ni pipes (based on seamless 'Kunifer 10' sizes) O/D of pipes conform to BS 2871 Part 2 Table 3. BS MA Table 2 BS MA60. Also suitable for O/D stainless steel tubing.

Pipe size Part No. Size (mm)
mm inch Pipe O/D
12.70 1/2" JW 153-16 16
19.00 3/4" JW 153-25 25
25.40 1" JW 153-30 30
31.75 1 1/4" JW 153-38 38
38.10 1 1/2" JW 153-45 45
50.80 2" JW 153-57 57
63.50 2 1/2" JW 153-76 76
76.20 3" JW 153-89 89
101.60 4" JW 153-108 108
152.40 6" JW 153-159 159
203.20 8" JW 153-219 219