High Load-Bearing Pad - RF/PA High Load-Bearing Pad - RF/PA TICO Anti Vibration High load-bearing pad material. Plies of synthetic rubber proofed cotton with interplies of neoprene rubber, modified with cellular particles. One side is faced with a thin layer of rubber bonded cork material to absorb irregularities in the concrete surface. Load bearing capacity 7MN/m2 Absorb shock loads without reducing efficiency Can be made with different make ups for specific custom applications Prolong the life of machinery Maximum sheet size: 1200 mm x 1200 mm Standard nominal thicknesses: 6 mm, 12.5 mm, 19mm and 25 mm Non standard thicknesses can be advised on by TICO Typical Applications Anvil pads for forging hammer installations Anti-vibration mounts on large plant Heavy duty buffers Pipe support and isolation (oil and gas industry) Elastomer component of TICO Sliding Bearings

High Load-Bearing Pad - RF/PA

Code: N/A

High load-bearing pad material. Plies of synthetic rubber proofed cotton with interplies of neoprene rubber, modified with cellular particles. One side is faced with a thin layer of rubber bonded cork material to absorb irregularities in the concrete surface.

View Brochure >>

  • TECHNICAL ASSISTANCE

  • UK MANUFACTURED

  • UK SHIPPING

High load-bearing pad material. Plies of synthetic rubber proofed cotton with interplies of neoprene rubber, modified with cellular particles. One side is faced with a thin layer of rubber bonded cork material to absorb irregularities in the concrete surface.

  • Load bearing capacity 7MN/m2
  • Absorb shock loads without reducing efficiency
  • Can be made with different make ups for specific custom applications
  • Prolong the life of machinery
  • Maximum sheet size: 1200 mm x 1200 mm
  • Standard nominal thicknesses: 6 mm, 12.5 mm, 19mm and 25 mm
  • Non standard thicknesses can be advised on by TICO

High load-bearing pad material. Plies of synthetic rubber proofed cotton with interplies of neoprene rubber, modified with cellular particles. One side is faced with a thin layer of rubber bonded cork material to absorb irregularities in the concrete surface.

  • Load bearing capacity 7MN/m2
  • Absorb shock loads without reducing efficiency
  • Can be made with different make ups for specific custom applications
  • Prolong the life of machinery
  • Maximum sheet size: 1200 mm x 1200 mm
  • Standard nominal thicknesses: 6 mm, 12.5 mm, 19mm and 25 mm
  • Non standard thicknesses can be advised on by TICO
  • Anvil pads for forging hammer installations
  • Anti-vibration mounts on large plant Heavy duty buffers
  • Pipe support and isolation (oil and gas industry)
  • Elastomer component of TICO Sliding Bearings