phone envelop google-plus3
Contact Adhesive S

TICO Contact Adhesive S

AA-002009 - 1 litre

AA-001053 - 5 litres

Contact Adhesive S is a cream coloured, brushable, general-purpose contact adhesive. It exhibits excellent adhesion to most surfaces and has good heat resistance. Bonds may be made over a wide range of open times because of its fast flash off and long open time.

Key Features:

  • Suitable for use with other TICO products
  • Full application details can be found on individual cans
View TICO Contact S datasheet

Download Datasheets

Application Help

  • Stir adhesive thoroughly before use. Ensure the surfaces to be bonded are clean, dry and free from dirt, grease and other contamination. Lightly abrade metal surfaces. Wipe clean with a suitable solvent such as methylated spirit.
  • Apply a thin, even coat of adhesive to both surfaces. Allow to become touch-dry (approx.10 - 30 minutes). On very absorbent surfaces a second coat may be required. Align carefully and bring the two surfaces together. Apply firm pressure over the whole surface, ideally using a roller or press to consolidate the bond. The adhesive forms an immediate, strong bond, but will achieve maximum strength after a few days. The newly bonded material should not be subjected to extreme temperature changes for 3 to 4 days after bonding and avoid further fabrication until the adhesive has fully cured.
  • 3 to 4 m2/litre per litre, depending on surface.
  • Read the product label before use. Further details can be obtained from the Health and Safety Data Sheet.
  • Related Products

    2 Part Epoxy

    More Details

    Contact Adhesive S is a cream coloured, brushable, general-purpose contact adhesive. It exhibits excellent adhesion to most surfaces and has good heat resistance. Bonds may be made over a wide range of open times because of its fast flash off and long open time.

    • There were some problems with your form submission:

    Please check your inbox for Contact S Datasheet - Please note: Some email providers will block our correspondence, if this happens contact us using details provided on our website.